Reloader's Guide

Alliant Powder Reload Recipes


Recipe

Non-Toxic Shotshell

12 Gauge
  • 3 1/2-in. Rem Plastic SP
  • 1 1/2 shot wt.
Dram Equiv.
Shot Wt.
(ounces)
Shot Type
Velocity
(fps)
Primer
Powder
Wad
Grains
Approx. psi
Spacers
--- 1 1/2 Steel 1,305 Fed 209A Steel Ballistic Products mm 12312 33 13,000 1/4 inch felt spacer under shot
--- 1 1/2 Steel 1,330 Fed 209A Steel Reloading Specialities "SAM 1" 35 13,000 1/4 inch felt spacer under shot
--- 1 1/2 Steel 1,330 Fed 209A Steel Reloading Specialities "SAM 1" 35 13,000 1/4 inch felt spacer under shot

You must also always remember:
1.Establish a routine for reloading. It will result in more uniform loads and less chance of error.
2.Some primers are more powerful than others (they produce more gas at a higher temperature). Use only the primers specified herein.
3.Shotshell wads differ in their sealing ability. Use only the load combinations specified herein.
4.If you use cast bullets, their diameter, hardness, lubrication, and crimp will affect the ballistics.
5.The shotshell loads in this booklet are for use with STEEL SHOT ONLY!
6.Use only the brands of powder and components shown in our tables. Do not substitute other types.
7.Discharging firearms in poorly ventilated areas, cleaning firearms, or handling ammunition may result in exposure to lead, a substance known to cause birth defects, reproductive harm, and other serious physical injury. Have adequate ventilation at all times. Wash hands and face thoroughly after handling and before coming in contact with food, chewing materials, and smoking material.