Reloader's Guide

Alliant Powder Reload Recipes


Recipe

Shotshell

410
  • 2 1/2-in. Remington Plastic Shells (STS, Premier)
  • 1/2 shot wt.
Shot Wt.
(ounces)
Velocity
(fps)
Primer
Powder
Wad
Grains
Approx. psi
Spacers
1/2 1,200 Rem 209 STS 410 SP410 12 9,500 -
1/2 1,230 Rem 209 STS 410 SP410 12.7 9,700 -
1/2 1,200 Rem 209 STS 410 Fed 410 SC 12.2 10,700 -
1/2 1,200 Rem 209 STS 410 WAA41 12.3 8,800 -
1/2 1,200 Rem 209 STS 410 CB1050-41 12.3 8,700 -
1/2 1,230 Rem 209 STS 410 Duster 4150 12.8 9,900 -
1/2 1,200 CCI 209M 410 SP410 12.2 9,800 -
1/2 1,200 CCI 209M 2400 SP410 13.5 11,000 -
1/2 1,250 Rem 209P 300-MP SP410 17.3 6,000 -
1/2 1,300 Rem 209P 300-MP SP410 18 6,800 -

You must also always remember:
1.Establish a routine for reloading. It will result in more uniform loads and less chance of error.
2.Some primers are more powerful than others (they produce more gas at a higher temperature). Use only the primers specified herein.
3.Shotshell wads differ in their sealing ability. Use only the load combinations specified herein.
4.If you use cast bullets, their diameter, hardness, lubrication, and crimp will affect the ballistics.
5.The shotshell loads in this booklet are for use with LEAD SHOT ONLY!
6.Use only the brands of powder and components shown in our tables. Do not substitute other types.
7.Discharging firearms in poorly ventilated areas, cleaning firearms, or handling ammunition may result in exposure to lead, a substance known to cause birth defects, reproductive harm, and other serious physical injury. Have adequate ventilation at all times. Wash hands and face thoroughly after handling and before coming in contact with food, chewing materials, and smoking material.